Insert the USB disk into an HMI and press and hold SYS to get to the system screen Select FILE > MAKE EXT MEMORY DATA and select the drive letter of your USB Disk Open and compile a configuration in HMISoft Insert a USB Disk formatted FAT32 into your PC In HMISoft select FILE > UPDATE FIRMWARE, in the dialog box uncheck AUTO SEARCH and enter IP address then click START In HMISoft, go to OPTIONS > CONFIGURATION Standard tab and set Upload/ Download to ETHERNET On the HMi, press and hold the SYS key to get to the system screen, select NETWORK and note the IP address of the HMi In HMISoft select FILE > UPDATE FIRMWAREĮthernet Transfer (6, 8, 10 inch with HMIECENT ethernet expansion module) On your HMI, press and hold the SYS button to get to the system screen, then select DOWNLOAD PORT, then select the com port number on the HMi you're connect to, when asked BYPASS MODE? choose NO In HMISoft, go to OPTIONS > CONFIGURATION Standard tab and set Upload/ Download to PC COM PORT and select the com port number of your RS232 port or converter In HMISoft select FILE > UPDATE FIRMWARE There are possible 4 methods- USB transfer from a Win XP machine, Serial Transfer, Ethernet transfer, and USB memory disk: To set up Windows 7 Upload/ Download compatibility on an HMI and HMISoft V1.18 or later there are two steps Only HMISoft V1.18 or later supports Windows 7.ĭownload the HMISoft version 2.11 from the Eaton website using the link below: Can't connect to HMi using Windows 7/10, failed USB port COM error
0 kommentar(er)
